环氧丙烷产业现状及发展趋势

简述了全球及我国环氧丙烷产业的生产及供需现状;对环氧丙烷在聚醚多元醇、丙二醇/碳酸二甲酯、丙二醇醚及其酯类等领域的应用进行了分析;并对环氧丙烷生产技术进行了比较,提出了发展建议。     

机械结构分层优化技术研究进展

复杂机械结构优化设计一般表现为多目标、多约束、多参数的优化问题,所以复杂结构优化设计过程通常存在计算复杂、不易收敛等困难。分层优化技术是复杂结构优化设计的一种有效途径,通过将优化问题中复杂的约束、设计变量以及功能目标合理分解为若干子层问题进行求解,然后通过协调得到复杂机械结构整体优化问题的结果。文章对机械结构分层优化技术的理论、应用研究现状进行了总结并探讨了其关键技术环节及发展趋势。     

耦合让均压支护在综采面端头维护的应用

为了提高综采工作面端头超前应力区顶板稳定性,降低顶板支护费用,对8309工作面端头应力区提出了耦合让均压支护技术,控制了端头应力区顶板下沉、破碎现象,可降低支护成本费用320元/m。     

塔山矿新型27 mm高强玻璃钢锚杆技术应用

由于塔山矿回采巷道均为放顶煤开采，矿压显现明显，巷道断面大，在回采过程中尾顺槽围岩变形量大，致使使用传统普通玻璃钢锚杆支护时出现杆体被拉断、杆体尾部被剪断等支护失效现象。为了解决上述问题，采用新型27 mm高强玻璃钢锚杆对塔山矿8112工作面进行试验。试验结果表明，在保证采掘安全的前提下，使用新型锚杆取代普通锚杆，可以大大提高巷道支护的稳定性，节约巷道支护成本，保证施工工期正常完成，同时提高工作面回采效率。采用新型锚杆后，使巷道支护兼具安全、经济双重效益，同时对全矿井以及其他所有同类型矿井类似回采巷道，具有积极的推广和借鉴意义。     

谈淤泥质复杂基坑地基处理及支护技术

淤泥质地形在施工过程中可能因地基强度不够而发生事故,施工难度高,对此类地基处理及支护技术的研究较为重要。     

建筑产业转型升级新时代下高职建筑工程技术特色专业建设问题的新思考

随着建筑业技术进步和转型升级,高职建筑工程技术专业建设应顺应新时代要求,产教融合,办出特色。本文提出了“四个对接一个融合”的特色专业建设新思考。     

Identification of potential technologies for 1,4-Butanediol production using prospecting methodology

1,4-Butanediol (1,4-BDO) is a four-carbon diol used for industrial applications such as organic solvents, and the production of adhesives, fibers and polyurethanes. 1,4-BDO currently is produced through several petrochemical routes: hydrogenation of maleic anhydride, isomerization of propylene oxide, acetoxylation of butadiene, and the reaction between formaldehyde and acetylene. The current trends in 1,4-BDO production involve the utilization of renewable sources such as biomass. In this context, the present study aimed to identify promising technologies of 1,4-BDO production through prospecting methodology based on the analyses of patents and scientific article, describing the most relevant aspects of those emerging technologies. An increasing amount of 1,4-BDO production focused on biotechnological routes has been reported, with the US heavily involved in the development of new technologies. This study tracked three promising technologies which have potential for application in a biorefinery context because those processes involve (i) production of 1,4-BDO from sugars, classified herein as the biotechnological route; (ii) production of intermediates from sugar fermentation followed by catalytic conversion into 1,4-BDO, classified herein as the hybrid route, and (iii) furan/furfural conversion into 1,4-BDO. © 2020 Society of Chemical Industry     

精密电解加工共性关键技术及其在航空制造中的应用

飞行器上关键结构件的几何特征复杂,传统方式难以满足加工需求,精密电解加工技术具有无工具损耗、无机械切削力、加工定域性好的优点,适用于各种形状复杂、难加工、低刚度构件的加工,在航空制造领域占有重要地位。在介绍精密电解加工共性关键技术的基础上,阐述了其在航空制造中的典型应用,并对发展前景进行了展望。     

Pregnancy by Assisted Reproductive Technology Is Associated with Shorter Telomere Length in Neonates

Telomere length (TL) influences the development of lifestyle-related diseases, and neonatal TL may influence their prevalence. Various factors have been reported to affect neonatal TL. Although the fetus is exposed to multiple conditions in utero, the main factors affecting the shortening of neonatal TL are still not known. In this study, we sought to identify factors that influence fetal TL. A total of 578 mother-newborn pairs were included for TL analysis. TL was measured in genomic DNA extracted from cord blood samples using quantitative PCR. The clinical factors examined at enrollment included the following intrauterine environmental factors: maternal age, assisted reproductive technology (ART) used, body mass index (BMI), gestational diabetes mellitus (GDM), maternal stress, smoking, alcohol consumption, preterm delivery, small-for-gestational-age, neonatal sex, and placental weight. Univariate and multivariate regression analyses were used to verify the relationship between neonatal TL and these clinical factors. The median neonatal TL to single-copy gene ratio was 1.0. Pregnancy with ART was among the 11 factors associated with shorter neonatal TL. From multiple regression analysis, we determined that neonatal TL was significantly shorter for pregnancies in the ART group than in the other groups. We conclude that pregnancy with ART is associated with shorter neonatal TL.     

长管拖车缠绕气瓶纤维层冲击损伤的数字射线检测

采用缠绕气瓶替代钢制无缝气瓶是长管拖车轻量化的重要手段之一,但对于缠绕气瓶缠绕层因冲击造成的内部损伤,目前仍缺少成熟有效的检测手段。采用数字射线检测方法,针对玻璃纤维缠绕层冲击损伤造成的分层和危害较大的纤维断裂进行了试验研究。试验表明,采用数字射线检测能够有效检测最小深度为0.5 mm模拟纤维环向断裂刻槽和0.25 mm的模拟纤维轴向断裂刻槽;此外,还通过试验验证增加补偿块的方式,能极大地改善缠绕层分层部位的一次切向透照成像质量,进而提高检测效率。